Description
The filter can be used in DC/DC converters, in order to exceed the requirements of MIL-STD-461 EMI. It is recommended to use a series filter in front as shown in the following figure.
For better EMI performance and stability, it is recommended to use Cin capacitors. Two filters can be connected in series for higher performance.
Properties:
- Input voltage 0÷100VDC
- MIL-STD-461
- MIL-STD-810
- Compact size – 50.8 mm x 40.6 mm x 12.7 mm
- PCB installation
- Up to 20A current input / output
- Up to 100V constant input voltage
- Differential mode insertion loss – 40db/250kHz, 45db/500kHz, typical
- Common Mode Insertion Loss – 52db/250kHz, 55db/500Hz, typical
- Typical resistance 10 m
- Insulation voltage 1500Vdc
- Operating case temperature -40°C ÷ +100°C
- Designed for use with half brick and quarter brick series
- Use passive components only for MTBF >1,000,000 hours
